Press Esc key to close this popup
Product Name

E F Scanner E Keyprog 2013.07 EF Class Explorer Prog

  • History: 0 Orders
  • Model: CKP079
  • Shipping Weight: 0.48kg
  • Units in Stock: 1000
(Shipped from China. Complete the orders At today. Shipping around 18/12/2018 ) Skype: CablesMall

Price:   $419.99

1 Reviews            
  • Details
  • Order History
  • Reviews
  • Online Chat
  • Tags
  • Shipping&Payment

For BMW E/F SCANNER suits for cars of E60, E65, E66, E70, E71, E81, E82, E87, E88, E90, E91, E92, E93, F01, F02, F07, F10, Mini Cooper R56 and Rolls-Royce For BMW Explorer. EF Class Explorer Prog Software version is 2013.07.


E F Scanner E Keyprog 2013.07 EF Class Explorer Prog

Software Version: 2013.07

Language: English
Operating System: Windows XP
Please do not upgrade it online, otherwise your SCANNER will be locked! And need send it back for repair
There is dongle in the package. Each dongle has the serial number, only can be used the same hardware in the package.
Instrument Cluster and CAS1-CAS4 Must Be Adjusted Manually
software system which allows to read, decode and edit ISN password (It is sync password between ECU and immobilizer) Correct checksum also calculated automatically

Note: The product is with USB Dongle, which match with the host only. So please don't lost the USB Dongle, it is very important.

Supported model list:

1-series (E81, E82, E87, E88), 2003+
3-series (E90, E91, E92, E93), 2004+
5-series (E60), 2002-2010
5-series (F10), 2010+
5-series "Gran Turismo" (F07), 2009+
7-series (E65, E66), 2000-2008
7-series (F01, F02), 2007+
X5 (E70), 2006+
X6 (E71), 2007+
Mini Cooper (R56, R57), 2005+
Rolls-Royce, 2003+

List of supported ECU:

Drive – 6 categories / 30 types; CAS, DME, EGS, EKPM, GWS, VTG
Chassis – 12 categories / 15 types; ASR, CIM, DSC, EDC, EDCSHL, EDCSHR, EDCSVL, EDCSVR, EHC, EMF, RDC, VDM
Body – 65 categories / 121 types; AHM, AMP, BFH, BFS, BZM, CCC, CDC, CHAMP, CIC, CID, DWA, ECL, FAH, FAS, FLA, FOMO, FRM, FZD, HKL, HUD, IHKA, JBBF, KBM, KGM, KOMBI, LMA, MASK, MMC, MMI, MPM, PDC, PGS, RAD, RFK, RLS, RSE, SASL, SASR, SBSL, SBSR, SD, SECUR, SFZ, SGM, SHD, SHZH, SIM, SSBF, SSFA, SSH, STVL, STVR, SZL, SZM, TEBF, TEFA, TEL, TMB, TMBH, TMF, TMFH, VID, WIM, ZBE, ZGM

System capabilities:

DTC reading with clear text explanation, car setting adjustment, maintenance interval adjustment, key programming or blocking, remote control synchronization and much much more!

1. 166 types of ECU supported
2. Diagnosis and interpretation of error codes
3. Reading and adjustment of run hours and maintenance intervals for: Oil, Filters, Brake pads, Spark plugs, Liquids, Inspections and services as well as co, ch inspections etc.
4. Adjustment of mileage and maintenance intervals
5. Change/Adjust FA code (currently in test mode)
6. CPU CODING
7. Read/Write RAM/FLASH/EEPROM
8. Read/Write ISN (marriage CAS and DME/DDE)
9. ELV Reset (steering wheel lock)
10. Key read/write via OBD2 in CAS2, CAS3, CAS3+
11. Key prog module for E/F-series
12. Learning key or transponder directly in the ignition lock
13. Lost keys blocking/unblocking
14. Mileage correction module for E/F-series
15. Change AIF (indexes of programming)
16. Reading the last saved mileage from ECU VIN change
17. New battery registration

NOTE: Instrument cluster and CAS1-CAS4 must be adjusted MANUALLY

Software system which allows to read, decode and edit ISN password (It is sync password betweenECU and immobilizer) Correct checksum also calculated automatically. Not all car models can be edit ISN password, when it not support that car model, it will exit automatically.

Tech tip:

Procedure of used ECU installation in car with automatic transmission:
Install used DME/DDE
Switch ignition ON.
Connect explorer, and run Quick test.
Go to EGS, press Unlock EWS
Got to DME/DDE and read ISN
Switch ignition OFF, connect to CAS, write down old ISN, write ISN previously read from DME/DDE and save it.
Switch ignition ON
Go to DME/DDE and make synchronization procedure.

Procedure of used ECU installation in car with automatic transmission:

Install used DME/DDE:

1. Install used DME/DDE
2. Switch ignition ON.
3. Connect E F Series Scanner, and run Quick test.
4. Go to EGS, press Unlock EWS
5. Got to DME/DDE and read ISN
6. Switch ignition OFF, connect to CAS, write down old ISN, write ISN previously read from DME/DDE and save it.
7. Switch ignition ON
8. Go to DME/DDE and make synchronization procedure.

E F Class Scanner Programmer package list:

1 X Mutiplixer E F Programmer
1 X DVD with software
1 X Usb cable

 

Similar Products
Sponsors
banner9
Have you seen ...
banner8