Press Esc key to close this popup
Product Name

Fcar FVCI Passthru J2534 Reflash VCI Replace Autel MaxiSys MS908P

  • History: 0 Orders
  • Model: ARS065
  • Shipping Weight: 2.15kg
  • Units in Stock: 1000
(Shipped from China . Complete orders today. Parcel arrived 3-7 working Days After Confirmed )

Price:   $1,488.00

0 Reviews            
  • Details
  • Order History
  • Reviews
  • Online Chat
  • Tags
  • Shipping&Payment

FVCI is a PASS-THRU device of FCAR. It supports J2534 protocol. Fcar FVCI Passthru J2534 Reflash VCI Replace Autel MaxiSys Pro MS908P. FVCI PassThru J2534 Reflash Programming is original from Fcar.


Fcar FVCI Passthru J2534 Reflash VCI Replace Autel MaxiSys MS908P

FCAR FVCI PassThru J2534 Reflash/Diagnostics VCI

FVCI is a PASS-THRU device of FCAR. VCI use 3 ARM microcontrollers design, this will make the processing capacity of FVCI stronger and support OEM software better. It supports J2534 protocol, and it will support other protocol for free later. In addition, the hardware of FVCI supports multiply communication manner of DOIP protocol, and it can setup Ethernet(tx_+, tx_-, rx_+, rx_-) and active line to any pin number of OBD2 except for ground pins and power pin.

Fcar FVCI Product feature:

Three ARM microcontrollers.
Three individual physical communication channels for protocols(CAN, single wire CAN, KWP, PWM, VPW, SCI and so on).
Ethernet converts to OBD2 for DOIP protocol, the pins(tx_+, tx_-, rx_+, rx_-, active line) can set any pin number of OBD2 except for ground pins and power pin.
Program voltage output between 5v and 20v.
One Ethernet port.
One analog input port.

Fcar FVCI Passthru specification:
 

Hardware function  
J2534 ISO15765
  ISO14230
  ISO9141
  ISO14230
  J1850
  SCI
  Single wire CAN
DOIP Ethernet port convert to OBD2
  Local area network of FVCI convert to OBD2
Program voltage port 5v-20v
Ethernet port 1.   Ethernet port to ODB2 interface for DOIP
  2.   Ethernet port to local area network of FVCI
Analog input 15 pins analog input
Vehicle port 26 pins port communicate to vehicle
Update pin Use for update firmware of FVCI
DC 12v power supply

 
FVCI J2534 support function

Diagnose function
For TOYOTA Techstream
For HONDA HDS
For Volkswagen ODIS
For VOVOL VIDA
For GM GDS
For BMW ISTA
For JARGUR LANDROVER JLR SDD

How to Update Fcar FVCI J2534 Passthru Software & Firmware?

Official website: www.fcar.com

1. Click 'FVCI" icon on the desktop. Note: The computer must be connected to internet.
2. Click "Read Version" can read FVCI software and hardware version.
3. Click "Firmware Update" can update the hardware.
4. Click "Software Update" can update the software.
5. Click "DOIP", then click "Enter DOIP mode", the FVCI will enter the situation of Ethernet convert to OBD2 of DOIP.
6. Click "Firmware Refresh" when you operate "firmware update" error.

Update Tips

1) Please enable internet connection before upgrade
2) The firmware version and software version must be the newest version meanwhile. Otherwise the device will appear some error.
3)  If you use "Firmware update" failed, you can use "Firmware refresh".  

 


 

 

Similar Products