Sponsors
banner7
Wednesday 04 September, 2019 | RSS Feed

The User Manual of LEISTO T12-11 Soldering Iron

by NandRepair Team



LEISTO T12-11 Soldering Iron is one of populare tools for Repair technicals. LEISTO T12-11 got 99% good feedback from all around the world. Knowing the correct instruction in order to use this tool better. here the User Manual of LEISTO T12-11 Soldering Iron:

Installment Steps:

1.Plug the iron tip into handle
2.Connect the handle to iron handpiece stands
3.Connect the iron handpiece stands to the main control station
4. Connect the main control station to the electricity supply outlet
5. Adjust the operating temperature you need

Operation Steps:

1. Connect handle to the outlet behind main control station
2. Connect power cord to the outlet behind main control station
3. Select operating temperature that you require on LCD display
4. Choose one cartridge you want on the cartridge stand
5. Align the selected cartridge to the corresponding hole on handle and connect both, slightly press it down to join them together and pick it up. Then push it hard into the iron tip extractor to fasten the cartridge and handle together
6. Now the equipment can work after several seconds

Working State and Working mode (including the user manual):

When iron handpiece departs from the stand, the buzzer starts to alarm and LCD display should be always on, and the cartridge should be in working temperature.

Sleeping mode:

When  iron handpiece comes back to its satand, LCD display turns to dark after 3 seconds, and the cartridge should reduce to the sleeping setting temperature.

Stop mode:

When iron handpiece comes back to cartridge stand, the buzzer starts to alarm, the LCD display has been in the state of dark, and the equipment stops heating to cartridge






News for Monday 26 August, 2019


View all news for Monday 26 August, 2019 on one page




Recent News




News archive