Sponsors
banner7
Friday 08 September, 2017 | RSS Feed

User Guide Of Soldering iron in cell phone repair

by NandRepair.com


Soldering iron is comanyly used to solder on PCB of cell phone, it is helping your to slder the parts which may disconnected, lose contacts or due to shock or jerk due to falling down. Soldering iron or soldering station is well known in cell phone repair industry.


The most common things you will need to solder are

Phone repair IC
Charging port
Headset connector
Phone Battery connecting
Phone Power button
Phone LCD
Phone spare parts

User Guide Of Soldering iron in cell phone repair

1. Clean the points on the phone motherboard you have to solder with the soldering iron or soldering station to make PCB flat.

2. Switch on the iron and keep it on for around 2 minutes so that it become very hot.

3. If you are right-handed, hold the part which you have to solder with the left hand and solder it with the right hand. If the part you want to solder is minute or small, you will need to hold it with tweezers.

4. Take some solder wire on the tip of the solder iron, put the part you want to solder and touch the point where you want solder it. When you see its stuck properly, leave the tip and do not move anything until the joint cools down and manually check it. If its nor proper, you can do it again until its stuck properly.

Which Soldering iron is best for cell phone repair?

among many kinds of Phone Repair Soldering Iron, such as ppd120 desoldering, PPD120E unsolder tool, BGA rework CNC Engraving station, QUICK 861DW, Which Soldering iron is best for cell phone repair?

NandRepair Kindly suggestion QUICK 861DW Hot Air Rework Station 1000w 220v Heat Gun Lead-free Soldering Station Fix Phone Repair BGA Chip IC Tools. Quick 861dw Hot Air Soldering Gun For Repairing Mobile Phone.






News for Thursday 07 September, 2017


View all news for Thursday 07 September, 2017 on one page




Recent News




News archive