Sponsors
banner7
Wednesday 26 September, 2018 | RSS Feed

BOIL TEST BRAKE FLUID ANALYZER User Manual

by NandRepair Team


Boil Test Brake Fluid Analyzer is too important for auto repair shop, service centre. It's a liquid medium for transferring braking pressure in automobile braking system, and an integral part of braking system. some of customer want to get one of brake fluid tester boil test, but they worried about how to user it? Now nandrepair share the user manual of BOIL TEST BRAKE FLUID ANALYZER. that Dispel all your concerns.

BOIL TEST BRAKE FLUID ANALYZER User Manual

1. Preparation



Put the main body on horizontal plane, and stretch out the test probe and support.

2. Extract brake fluid (extract brake fluid from the vehicle and pour them into the glass cup)



Note: the volume of extracted brake fluid should be no less than 20ml, while no more than 25ml.

3. Put the glass cup under the test probe (keep them on horizontal workbench).

 

Keep the glass cup dry, clean, no foreign matter and stains.

Start Test

1. Connect with 12V/DC power supply, then press power key to turn on the device. The LCD screen will display following image.

2. Select the type of brake fluid to be tested with function key. For example, DOT4.



3. Press "Start" key, then following image will be displayed.

4.Check the test result (according to the boiling point of sample brake fluid, the LCD screen will display one of three images as follows).



Explanation to the test result

A:"Good". That means no need to replace brake fluid.

B:"Replace now". That means the brake fluid should be replaced immediately.

 






News for Tuesday 25 September, 2018


View all news for Tuesday 25 September, 2018 on one page




Recent News




News archive