Sponsors
banner7
Tuesday 19 December, 2017 | RSS Feed

How To use Lancol MICRO-1200s Auto Leakage Current Clamp Meter

by NandRepair.com


LANSL MICRO-1200s Car Battery Clamp Meter is new arrive item from nandrepair. MICRO-1200s AC Leakage Clamp is also called MICRO-1200s auto leakage current clamp meter, MICRO-1200s auto dark current clamp meter, MICRO-1200s auto charging current tester. here we share how to use Lancol MICRO-1200s Auto Leakage Current Clamp Meter as follows:



How To use Lancol MICRO-1200s Auto Leakage Current Clamp Meter?

1. Press POWER key to turn on the leakage current tester, then press ZERO keyto clear the value to zero,until the number become 0±3mA.To be noted,every measurement, need to zero.

2.set the tester clamp head in the car battery positive or negative line, turn off the car keys and all electrical equipment.

3.If the test shows a quiescent current greater than 100mA, then there is leakage.

4.After the general automobile flameout, the quiescent current of Asian car will remain at 30-40mA; European cars will remain at 80-90mA, depending on the number of electrical appliances on the car, the more high-end cars, the greater the quiescent current.Generally, the more high-grade cars, the greater the static current.

5.if you find the quiescent current is too large, then you can open the fuse box, unplug the fuse one by one. When you find pull a fuse out, the leakage current dropped evidently, that show the corresponding electrical appliances are abnormal.

6.Check and repair the abnormal electrical appliances, check the quiescent current again






News for Monday 18 December, 2017


View all news for Monday 18 December, 2017 on one page




Recent News




News archive