Sponsors
banner7
Wednesday 02 May, 2018 | RSS Feed

How To Use WOYO PDR007 Magnetic Induction Heater PDR?

by NandRepair Team


As We Know, The WOYO PDR 007 is a dent repair tool that uses the principle of magetic induction heating to its advantage, WOYO PDR007 can fix soft dents on metal surfaces is only 30 seconds, is easy to use for auto repair technicans, any technicans with a background in metal compostition can master it in 3 minutes, today, we will talk about How To Use WOYO PDR007 Magnetic Induction Heater PDR?


Before using this device, you must read the instructions. If the instructions are not followed carefully, the operator could suffer injury, the device could be damaged, or the car being treated might be damaged.

Before-use warning (MUST READ)

1. Not suitable for operation by those with pacemakers or artificial limbs with metal parts.

2. Before using this device, you must wear a safety mask, safety gloves, and safety clothing to avoid being burned during use.

3. Operators must not have any metal objects on their person during operation, including but not limited to watches, cuff links, keys, belt buckles, coins, or zippers.

4. This device cannot be operated in areas with conductive particulate matter, areas used for applying paint, areas housing or handling chemical fuels, areas of high temperature, and areas of high humidity.

5. Once the device is powered on, flammable objects must be kept away from the device.

6. Before you power on the device, make sure that you have a fire extinguisher on hand in case any misoperation causes a fire.

7. Do not use this device in the vicinity of safety airbags.

8. Once the device is powered, there must be personnel on site to watch over the device. When the device is not in use, unplug the device's power cable.

9. This device should be stored at temperatures between 0 and 50 celsius. When transporting the device, avoid vibrations or shocks.

Important warnings for use (MUST READ)

1. While the restoration head is restoring a damaged car body, the temperatures of both the restoration head and the body will rapidly increase. Do not touch either the restoration head or the car body before they have had time to cool down.

2. While the restoration head is in the process of restoration, the temperatures of both the restoration head and the damaged area will rapidly increase. Using the restoration head on one area for too long may increase temperatures to the point of damaging the car's paint job (it is recommended that every 1-1.5 seconds, the operator wipes down the damaged area with a wet rag in order to keep the temperature manageable).

3. During the restoration process, the temperatures of both the restoration head and the damaged area will rapidly increase and the body of the car will immediately become softer. During restoration, make sure the restoration head is not applying pressure to the car, otherwise the restoration process itself might further dent the car.






Other news for Wednesday 02 May, 2018


View all news for Wednesday 02 May, 2018 on one page




News for Tuesday 01 May, 2018


View all news for Tuesday 01 May, 2018 on one page




Recent News




News archive