Thursday 23 February, 2017 | RSS Feed

Upgrade Guide Of NAVIPLUS PRO3000 NAND Programmer

by NandRepair.com

The Lastest Update for NAVIPLUS PRO3000 32bit and 64bit NAND programmer. If Your NAVIPLUS PRO3000 apple NAND programmer software is old, you need to update to the newest version.How to update 32bit 64bit NAND Flash repair Machine? Here is the Upgrade guide Of NAVIPLUS PRO3000 NAND Programmer from NandRepair.

32bit 64bit NAND Flash HDD Repair SN Model For iPhone iPad

1. Upgrade description:

1.1  Can't put the NAND in adapter when Install process or machine start up;

1.2. Format the SD card with FAT32, TF card can also be, pay attention to TF card insertion for toward the contact points, and SD card inserted opposite;

1.3. Upzip the file and put the BIN file to the root of SD card, as follow:

1.4  When the installation or start up, NAND should not be placed on the adapter;

1.5. Click the Soft Update button;

1.6 Installation process will disply real-time, don's ejected the SD when install process.General

installation process will be completed within 15 seconds. After completion, the machine will

automatically restart and load the latest software version;

2 The operation after updated:

2.1. If the touchpanel is not sensitive after update, you can make a touchpanel calibration,click the

Calibrate button in main interface will open the calibration interface,Click the '+' sign that shows

in panel step by step. If the '+' sign disappear, must click any position of the screen for save the

calibreate coordinate and quit the interface, if poweroff in the time, the calibreate coordinate will

lost and the system use the default touch coordinate for use;

2.2 Check the Config in the read&write interface for check

Other news for Thursday 23 February, 2017

View all news for Thursday 23 February, 2017 on one page

News for Wednesday 22 February, 2017

View all news for Wednesday 22 February, 2017 on one page

Recent News

News archive