Press Esc key to close this popup
Product Name

TPMS Learning Tool Tire Pressure Monitoring System For Ford

  • History: 0 Orders
  • Model: OCP027
  • Shipping Weight: 0.3kg
  • Units in Stock: 1000
(Shipped from China. Complete the orders At today. Shipping around 17/12/2018 ) Skype: CablesMall

Price:   $67.00

1 Reviews            
  • Details
  • Order History
  • Reviews
  • Online Chat
  • Tags
  • Shipping&Payment

TPMS Learning Tool needs to be retrained with the new sensors or tires. Tire Pressure Monitoring System For Ford vehicles. TPMS Sensor using the TPMS Trigger tool.


TPMS Learning Tool Tire Pressure Monitoring System For Ford

Tire Pressure learning tool

Required when rotating tires. see tire pressure monition system section in owner's guide for tool storage and usage instructions.

outil d'appenissage de pression des peneus obligatoire durant la rotaion des pneus. reportez vous au chapitre du systeme de surveillance de la pression des pneus dans le manuel du proprietaire pour les informations concerenant l'utilisation et le rangement de cet outil.

TPMS system needs to be retrained with the new sensors or tires. the procedure for this is as follows.
first of all, check to see that the tires are inflated to the proper pressure. cycle the ignition on and off three times ending in the on position. then press the brake pedal once.
Turn the ignition off, then cycle it on and off again three more times ending in the on position.
The TPMS light will now blink to let you know that it is in training mode. now take the traming transmitter to each of the foure tires and aim it 180 degrees from the valve stem(at the sensor) the horn will honk once when it recognizes the sensor. if it honks twice it has failed & the procedure must begin again.
You can rotate your tires without affecting the system, but if you have different sets of tires with their own sensors, you'll need to retrain the system when they are installed.

Tire Pressure Monitoring System (TPMS) Sensor Training Program Tool is a direct fit for the following:

2007-2014 F-150
2008-2015 F-250 F-350 F-450 F-550 Super Duty
2007-2015 Mustang
2007-2014 Edge
2006-2015 Escape
2008-2015 Expedition
2006-2016 Explorer
2008-2015 Flex
2008-2015 Taurus
2008-2015 E-150 E-250 E-350 E-450 Econoline Vans
2008-2015 Fiesta
2008-2015 Focus
2008-2015 Fusion
2008-2011 Crown Victoria
2011-2015 Transit Connect
2006-2011 Ranger
2007-2015 MKX
2007-2015 MKT
2008-2015 MKZ
2008-2015 MKS
2008-2015 Navigator
2008-2011 Town Car
2007-2008 Mark LT
2006-2010 Mountaineer
2006-2010 Monterey
2006-2011 Mariner
2006-2011 Grand Marquis
2006-2011 Milan

Genuine Part Number: 8C2Z-1A203-A

How to Train Tire Pressure Monitior Sensors TPMS?

1. Turn the ignition switch to the OFF position, then press and release the brake pedal.
2. Cycle the ignition switch from the OFF position to the RUN position 3 times, ending in the RUN position.
3. Press and release the brake pedal.
4. Turn the ignition switch to the OFF position.
5. Turn the ignition switch from the OFF position to the RUN position 3 times, ending in the RUN position.  
*The horn will sound once and the TPMS indicator will flash if the training mode has been entered successfully. If equipped, the message center will display TRAIN LF TIRE.*
6. Place the tire pressure monitor activation tool on the LEFT (Driver's Side) FRONT tire sidewall at the valve stem.
Press and release the test button repeatedly on the TPMS Tool until the horn beeps.  
(It may take up to 6 seconds for the tool to activate the sensor, Leave the tool on the sidewall for the entire 6 seconds).  
The horn beeping indicates that the body control module has recognized the TPMS sensor.
7. Within 2 minutes of the horn sounding confirming programming of the LF tire, place the TPMS tool on the RIGHT (Passenger's Side) FRONT tire sidewall at the valve stem and press the test button to activate the sensor.
8. Repeat step 7 for RIGHT REAR followed by LEFT REAR tire in that order. The procedure is complete after the last tire has been trained.  
When training is complete, the message center (if equipped) will display TIRE TRAINING COMPLETE. For vehicles not equipped with a message center, successful completion of the training procedure is verified by turning the key to the OFF position without the horn sounding.  If the horn beeps twice when the switch is turned to OFF the training procedure was not successful.
 
NOTE 1: If the vehicle or wheels/sensors have been stationary for more than 30 minutes, the sensors will go into a "sleep mode" to conserve battery power. It is necessary to wake them up by simply moving them or rolling the tires before they will communicate with the vehicle.
 
NOTE 2: The TPMS training procedure must be done on one vehicle at a time, in an area without radio frequency interference - at least 3 feet away from other vehicles equipped with TPMS sensors.
 
NOTE 3: Vehicles with different tire pressures front-rear like F-Series trucks and E-Series vans also require TPMS re-training after a tire rotation.  Failure to train the sensors will cause the TPMS warning light to illuminate on the dash.

Package Includes:

1pc x 2006-2016 For Ford TPMS Sensor Training Tool


 

Similar Products
Sponsors
banner9
Have you seen ...
banner8